HC62TH Pipe Fiber Laser Cutting Machine
5.0 (215)
Laser Power:1kw-12kw
Cutting size:6m,12m etc.
Cutting diameter:160-360mm
Intelligent Digital Chucks
Cut Multi Types of Tubes
Fractional Automatic Support Installation
Intelligent Digital Chucks
Specific chuck with heavy bearing, always two chuck keep clamping during cutting process to guarantee high cutting precision.Applied with 360mm diameter pneumatic chuck, support 20-240mm tube. Clamping is stable, no damage for workpieces
Cut Multi Types of Tubes
Not only cut conventional tubes like round, square and rectangular tubes, and profiles like channel, angle and H-shaped steels,also cut special-shaped tubes easily like triangular, concave, Land C-shaped tubes, etc.
Automatic Support
- Fractional Automatic Support Installation
- It employs intelligent tube support design
- which can solve the deformation problems in the process of long tube cutting
Intelligent Autofocus
The high efficiency cooling:
Collimating lens and focus lens group are cooling structure, increase cooling airflow nozzle at the same time, the effective protection of nozzle, the ceramic body, prolonged work time.
Chase the light aperture:
Through the pore diameter of 35 mm, effectively reduce the stray light interference, ensuring cutting quality and service life.
Automatic focus:
Automatic focus, reduce human intervention, focusing speed 10 m/min, repeat accuracy of 50 microns.
High speed cutting:
25 mm carbon steel sheet pre punch time < 3 s @ 3000 w, greatly improve cutting efficiency.
Metal Laser Cutting Machine Features
Taiwan YYC Gear transmission
Taiwan YYC Gear transmission
* Taiwan YYC Gear transmission, world famous brand,
* Transmission is stable and reliable
* The transmission efficiency is as high as 90% ~ 98%
* Much higher precision than other transmission way.
Square rail
Square rail
* No need lubrication system, saving the oil cost.
* Easy for maintenance, for usual practice, it can work for many years without maintenance.
* Easy for installing and dismantling.
Bearing - Japan NSK
Bearing - Japan NSK
* These bearing housings have square flange which
can be easily attached to a machine with four bolts.
* With its simple mounting face, this bearing unit is widely used
Pneumatic Components - Japan SMC
Pneumatic Components - Japan SMC
* Stepless control of air pressure proportional to an electrical signal.
* Serial communications specifications.
* Compact/lightweight Integrated communication parts).
Electron Components - France SCHNEIDER
Electron Components - France SCHNEIDER
* Circuit protection against short-circuit currents,Circuit protection against overload currents,Breaking and industrial disconnection as per standards IEC/EN 60947-2.
* Over voltage resistance, high performance limitation to fast closing independent of the speed of actuation of the toggle.
Electron Components - France SCHNEIDER
Wireless remote control equipment
* Magnetic design can be adsorbed on the machine bed at any time, available at all times.
* It allows you to operate the machine at close range and control the machine at different angles.
Technical Specifications
| Mode | HC60TH | HC62TH |
|---|---|---|
| Min Diameter | Φ20mm □20mm | Φ20mm □20mm |
| Max Diameter | Φ240mm □240mm | Φ350mm □350mm |
| Laser Power Supply | 1500w, 2000w, 3000w, 6000w,8000w,12000w | |
| Maximum Acceleration | 1.0G | |
| Positioning Accuracy | ±0.03mm | |
| Voltage | 380V 3PH50/60HZ | |
| Chuck Speed | 60r/min | |
| Remark | We can customize services /OEM according to customer requirements | |
Laser Cutting Machine Sample
This professional tube fiber laser cutting machine is used for cutting square tube, rectangular tube, oval tube, waist type tube, hexagonal tube; square tube Φ20 * 20- □240 *240mm, Round tube and square tube Φ20-Φ 240mm, H steel#10–#18 U-steel tube #5–#18 L-steel tube #4–#16 thickness of 0.5-10mm carbon steel tube, 0.5-10mm stainless steel tube.
